Simply put, welding in Lehigh Valley, PA is a metal fabrication process by which two pieces of metal is connected into a huge structure. The location to be joined is heated to melting using torch or electrical arc and additional metal material in the form of welding in Lehigh Valley, PA rod or welding wire is used to fill the gap. The welded connections are as stronger as the base material or even more.
There are three basic types of welding in Lehigh Valley, PA. They are the Gas welding, Arc welding and Spot welding. In the gas welding in Lehigh Valley, PA, a gas torch is used to heat and melt the base metal. Commonly a mixture of oxygen and acetylene is the gas combination used for gas welding in Lehigh Valley, PA. They are usually used for welding pipes. The gas welding in Lehigh Valley, PA is also used for brazing, cutting and heating metal for bending since the temperature of the torch flame can be varied.
The Arc welding in Lehigh Valley, PA uses an electric current to melt the base metal. There are different types of arc welding in Lehigh Valley, PA available for handling different metals, equipment and conditions. Each type would be suitable for welding in Lehigh Valley, PA a specific metal. For joining thin sheets of metals, the spot welding in Lehigh Valley, PA is used in which an electric current is used to create a weld at a single location. This type of welding in Lehigh Valley, PA is largely used for robotic processes. The robots are capable of performing large number of spot welds in automobile assemblies. There are also more recent innovations in welding in Lehigh Valley, PA like beam welding which are used for specific applications.
In almost every industry from automobiles to electronics, the welding in Lehigh Valley, PA is being used. Welding can be even performed underwater or in the vacuum space if the welder is given the appropriate equipment. Even though the welding in Lehigh Valley, PA is generally performed on steel parts, the aluminum parts are also welded together. Some aluminum alloys are particularly easy to weld.
As the welding in Lehigh Valley, PA involves high levels of electric current, gases and temperature, it is important to take certain safety measures while performing welding in Lehigh Valley, PA. The welders are advised to take extreme care for protecting themselves. Some safety equipments like welding in Lehigh Valley, PA masks, gloves, aprons and coveralls.
The welding masks are shields that cover the head and neck and have darkened glass to protect eyes from high intensity of lights of the welding in Lehigh Valley, PA spark. The masks would be hinged so that the welders can easily remove the mask to evaluate his work without fully removing the mask. During welding in Lehigh Valley, PA, sparks are thrown off and this would heat and burn the welder's hands. welding in Lehigh Valley, PA. So for protecting welder's hands, the gloves should be used. It is always suggested that the welders should wear leather aprons and coveralls for protecting themselves from the heat and gases. Sometimes the welders are seen to be operating behind tinted shields. This is to prevent passersby from seeing the welding in Lehigh Valley, PA sparks directly.
The main advantage of welding process is that it creates a permanent and strong bond between two metal parts that would not shift or break over time. It is basically a process of melting and joining metals locally by which a strong bond is created.